V:1.0
Copyright © 2014 Aqua Creek Products All Rights Reserved
Revised 12/11/14
V:1.0
Troubleshooting Guide
Problem:
The lift won’t move when the handset button is pressed.
2) Make sure the cords are properly plugged in:
Check the ends of the cords for corrosion or damage. The cord plugs
should be recessed into the outlet. You should feel them pop into
place when they are correctly inserted.
Solution:
1)
Make sure the battery is properly seated:
You should hear a click when the
battery is properly seated on the
control box or charger.
Click!
NOT Properly Attached:
Note the white bracket is
in front of the silver clip,
which will not allow for an
electrical connection
Properly Attached:
Note the white bracket
is behind the silver clip,
holding it securely to allow
for an electrical connection
NOT Properly Inserted:
The cord plug is flush with or
sticking out of the outlet
Properly Inserted:
The cord plug is recessed
into the outlet
POP!
These are the most common issues. Visit our website for all troubleshooting
solutions (Including videos).
13
