AQUADUCT CONTROL UNIT
- 24 -
Aqua Computer GmbH & Co. KG
© 2008-2009
Gelliehäuser Str. 1, 37130 Gleichen, Germany
-
aquaduct information page 2
-
aquaduct information page 3
-
aquaduct information page 4
-
Pump information page 1
-
Pump information page 2
-
Fill level
By selecting the entry "Back" you exit this menu entry. For details about
the individual screens see 4.3. If all screens are deactivated, the start
screen is shown permanently as is the case when the aquaduct is turned
on.
10.10.
10.10.
10.10.
10.10. Key click
Key click
Key click
Key click
This setting adjusts the volume of the key click. By setting this value to
zero, you can turn the key click off completely.
10.11.
10.11.
10.11.
10.11. Back
Back
Back
Back
Leaves the submenu and returns to "Settings".
11. Men
11. Men
11. Men
11. Menu
u
u
u „Relay
„Relay
„Relay
„Relay““““
This menu is used for the configuration of the relay function. This func-
tion requires further components (connecting cable for the relay output,
where applicable a standby power supply) as well as the correct integra-
tion of the relay output into the ATX-control line of the PSU or into the
connector of the power-button on the motherboard. Optimally config-
ured, this function can effectively prevent hardware damages when one
or more components fail even if the PC already crashed a long time
ago and software solutions failed.
11.1. Relay
11.1. Relay
11.1. Relay
11.1. Relay a
a
a
auto
uto
uto
uto mod
mod
mod
mode
ee
e
This setting determines, whether the relay is controlled automatically or
manually. If the relay is to be used for emergency shutdown functions
(additional accessories required), automatic mode must be enabled.