AQUADUCT CONTROL UNIT
- 28 -
Aqua Computer GmbH & Co. KG
© 2008-2009
Gelliehäuser Str. 1, 37130 Gleichen, Germany
If the brightness of the LED was manually adjusted, this call deactivates
the manual regulation and activates the temperature-dependent regula-
tion.
13.2. Sensor 2 (a
13.2. Sensor 2 (a
13.2. Sensor 2 (a
13.2. Sensor 2 (auto)
uto)
uto)
uto)
Allows the selection of an additional sensor to regulate the brightness of
the LED. For details, see 13.1. Sensor 1 (auto).
13.3.
13.3.
13.3.
13.3. Brighter
Brighter
Brighter
Brighter////Darker
Darker
Darker
Darker
Select here whether the LED should become brighter or darker with in-
creasing temperature at the assigned sensors.
13.4.
13.4.
13.4.
13.4. Brightness
Brightness
Brightness
Brightness
Activate the manual regulation of the brightness for the LED and allows
the setting of a constant brightness. The entered value is represented by
a graphical bar.
If the brightness of the LED was regulated temperature-dependent, this
call deactivates the temperature-dependent regulation and activates the
manual regulation.
13.5.
13.5.
13.5.
13.5. Flash during alarm
Flash during alarm
Flash during alarm
Flash during alarm
By activating this function the connected LED flashes when an alarm is
triggered.
13.6.
13.6.
13.6.
13.6. Back
Back
Back
Back
Leaves the submenu and returns to the LED selection
14. Menu
14. Menu
14. Menu
14. Menu „
„
„
„Clock a
Clock a
Clock a
Clock and Timer“
nd Timer“
nd Timer“
nd Timer“
14.1.
14.1.
14.1.
14.1. Clock set
Clock set
Clock set
Clock set
Enter the current day of the week as well as the time (24 hour format).
As long as the device is supplied with power, the weekday and time re-
main current. If the aquaduct is connected to the standby-power supply
of the PSU, time stays current even when the PC is turned off (soft-off).