AQUADUCT CONTROL UNIT
- 12 -
Aqua Computer GmbH & Co. KG
© 2008-2009
Gelliehäuser Str. 1, 37130 Gleichen, Germany
** Override **
- 0,0 C + 0 %
(Back to the top)
5.
5.
5.
5. Device settings
Device settings
Device settings
Device settings
5.1.
5.1.
5.1.
5.1. Basic operation
Basic operation
Basic operation
Basic operation
In the normal display operation, you can enter the configuration menu
by pushing the rotary knob. In the configuration menu, you can select
individual entries by turning the rotary knob and then pushing the knob.
5.1.1
5.1.1
5.1.1
5.1.1. Definition of names
. Definition of names
. Definition of names
. Definition of names
The aquaduct allows you to change all sensor and fan names. After se-
lecting a corresponding menu entry the current sensor name is shown
and a underscore marks the first character. By turning the rotary knob,
the first character can be changed. The characters appear in the follow-
ing order: capital letters, lower case letters, space, and numbers. By se-
lecting the character “
“, the cursor jumps back to the previous posi-
tion.
After confirming your selection by pressing the rotary knob, the cursor
will move on to the next character. Repeat the procedure for all charac-
ters. After confirming the last character, the aquaduct will show the
menu again.
All sensor names have a predefined length. If you would like to use
shorter names, you have to fill the free signs with spaces.
5.1.2. Prin
5.1.2. Prin
5.1.2. Prin
5.1.2. Principle of assigning sensors to fans
ciple of assigning sensors to fans
ciple of assigning sensors to fans
ciple of assigning sensors to fans
As a basic principle, fan regulation parameters such as mini-
mum/maximum temperature and target temperature are defined for
each temperature sensor, not for the fans. This means that you will have
to configure the temperature sensor first and then assign this configured
sensor to one ore more fans.
One or two temperature sensors can be assigned to each fan, alterna-
tively each fan can also be manually controlled.