AQUADUCT CONTROL UNIT
© 2008-2009
Aqua Computer GmbH & Co. KG
- 21 -
Gelliehäuser Str. 1, 37130 Gleichen, Germany
the speedometer signal degenerates at a low power output and thus
cannot be processed by the aquaduct. In this case you should deacti-
vate this function to regulate the fan independently of the quality of the
speedometer signal.
8.11. Override
8.11. Override
8.11. Override
8.11. Override on/off
on/off
on/off
on/off
Enables/disables the override function for this fan channel.
8.12.
8.12.
8.12.
8.12. Hold minimum power
Hold minimum power
Hold minimum power
Hold minimum power
By activating this function the fan output is operated at at least the
minimum power in the modes „linear“, „progressive“ and „target value“
even if the temperature is below the minimum or target value.
8.13.
8.13.
8.13.
8.13. Back
Back
Back
Back
Leaves the submenu and returns to the fan selection.
9. Menu
9. Menu
9. Menu
9. Menu „Pump“
„Pump“
„Pump“
„Pump“
9.
9.
9.
9.1. Auto
1. Auto
1. Auto
1. Auto mod
mod
mod
mode
ee
e on
on
on
on////off
off
off
off
This setting determines whether the pump is set to a manually defined
rotation speed (setting „Manual Frequency“) or will automatically de-
termine its maximum rotation speed and run at this speed (setting „Auto-
matic frequency“). Maximum rotation speed varies depending on flow
resistance of the cooling system.
9.2. Min
9.2. Min
9.2. Min
9.2. Minimum frequency
imum frequency
imum frequency
imum frequency o
o
o
on/
n/
n/
n/off
off
off
off
When activated, the pump will automatically restart if the set value for
minimum frequency cannot be met during start-up of the pump.
9.3. Min
9.3. Min
9.3. Min
9.3. Minimum fr
imum fr
imum fr
imum frequency
equency
equency
equency
This value defines the minimum frequency equaling a minimum rotation
speed for the pump. This value is only processed if “minimum frequency
on/off” is enabled.
