AQUADUCT CONTROL UNIT
© 2008-2009
Aqua Computer GmbH & Co. KG
- 31 -
Gelliehäuser Str. 1, 37130 Gleichen, Germany
15.1.
15.1.
15.1.
15.1. Measurement
Measurement
Measurement
Measurement 1 Sensor 1
1 Sensor 1
1 Sensor 1
1 Sensor 1
Choose the temperature sensor with the lower temperature for the po-
wer measurement 1. This for instance could be the supply line of a wa-
ter cooler or the return line of the aquaduct.
15.2.
15.2.
15.2.
15.2. Measurement
Measurement
Measurement
Measurement 1 Sensor 2
1 Sensor 2
1 Sensor 2
1 Sensor 2
Choose the temperature sensor with the higher temperature for the
power measurement 1. This for instance could be the return line of a
water cooler or the supply line of the aquaduct.
15.3.
15.3.
15.3.
15.3. Measurement
Measurement
Measurement
Measurement 2 Sensor 1
2 Sensor 1
2 Sensor 1
2 Sensor 1
Choose the temperature sensor with the lower temperature for the po-
wer measurement 2. This for instance could be the supply line of a wa-
ter cooler or the return line of the aquaduct.
15.4.
15.4.
15.4.
15.4. Measurement
Measurement
Measurement
Measurement 2 Sensor 2
2 Sensor 2
2 Sensor 2
2 Sensor 2
Choose the temperature sensor with the higher temperature for the
power measurement 2. This for instance could be the return line of a
water cooler or the supply line of the aquaduct.
15.5.
15.5.
15.5.
15.5. Back
Back
Back
Back
Leaves the submenu and returns to "Settings".
16. Men
16. Men
16. Men
16. Menu
u
u
u „F
„F
„F
„Fill level
ill level
ill level
ill level ““““
16.1.
16.1.
16.1.
16.1. Recalculate fill level
Recalculate fill level
Recalculate fill level
Recalculate fill level
After selecting this menu entry, the aquaduct will perform an analysis of
the current fill level and you will leave the settings menu. To perform the
fill level analysis, the pump will temporarily be set to a (low) reference
speed and after completion be reset to its original speed. A prerequisite
for a reliable level analysis is a preceding calibration of the 100 % ref-
erence value.
