6
Quality for Professionals
5.2 Attaching to the tractor
For this type of attachment, screw the
tractor drawbar between your ZS 200
M3 and the counter plate provided in
the scope of delivery. You should use
bolts with a diameter of 10mm.
Screw the top link bracket to the top link plate and fix your tractor's top link in place
with the bolt.
5.3 Mounting on an attachment
In order to extend the ZS 200 M3 with an
attachment, the best way is to use the counter
plate. Use this to secure your ZS 200 M3 to a
frame on the attachment.
CAUTION: Please note that the sowing height
(installation height of the ZS 200 M3) of the seed
has an influence on the spreading width. This is a
key consideration, particularly when it comes to
very large working widths.
5.4 Fastening the control module
Using two screws, fasten the standard holder
(provided in the scope of delivery) in the cab. Store
excess cable in the driver's cab to avoid clamping it.
TIP: Pay attention to the angle at which you view the
module to ensure optimum readability of the display.
You might have to bend the mount slightly to set the
correct angle.
Fig.: 2
Fig.: 4
Fig.: 3
Fig.: 1
