10
Quality for Professionals
6.0 Main display
Power-up message: Is displayed during the power-
up procedure and shows the type and implement
versions!
The software version can be very helpful for customer service or when servicing.
Set motor speed in rpm
Slide valve opening in mm
Once the implement has powered up, you can move through the menu
using the following three buttons:
In the menu, the cursor buttons are used to move up or down one
menu item at a time.
Use
to select a menu item then confirm the selection with
.
Here, using
again, you can select a submenu (if available) and confirm the
selection with
; this opens the value setting mode.
Values can be set using the
buttons.
Always confirm the set value with
.
Note: If no further settings are made, the display returns to the main screen.
The following menu items are available:
Surface area calculation
Seed rate calibration
test
Field side spreading
Empty?
Day counter
Surface area:
25.56 hectares
Operating hours:
576.23
Operating voltage:
12.7 V
Motor1:
11.5A
Motor2:
10.3A
Emergency operation
mode
Select language?
Speed:
Slide valve:
