8
Quality for Professionals
5.6 Agitator
The two agitators are fitted in the container and a driven
at a constant speed by their own
agitator motor. The motor is located between the two
discharge hoppers and operates the agitator in the
spreading tank, which turns in a vertical direction, via a
drive shaft. The agitator does not have to be switched
on separately; it starts turning as soon as the spreader
plates are switched on. The shape of the agitator (star-
shaped) and the vertical rotation direction avoid the
scatter material being ground up.
5.7 Emptying the tank
To empty the tank, unscrew the two discharge
nozzles at the front of the tank and hold a container,
bag or other receptacle under it.
TIP: In order to avoid fully emptying it, use the
calibration bag, which comes as standard.
Then secure the calibration bag in front of the
spreader plates. It is secured using magnets, which
are sewn into the calibration bag.
Then, you can fully empty the tank by selecting the
menu point "Empty" on the control module [see point
6.4 of the selection menu]:
The agitator motor and spreader discs start to turn
slowly and the metering slide valve opens fully. Allow
the spreader to run until the tank is completely empty
and the unit is no longer discharging scatter material.
IMPORTANT NOTE: Please do not clean the spreader with water. Only clean the ZS
200 M3 with an air pistol (blow it out) or with a dry or slightly damp cloth.
Fig.: 8
Fig.: 7
Fig.: 9
