11
Quality for Professionals
Surface area calculation
Working width:
12.6m
Driving speed:
10km/h
To the main menu
Seed rate calibration
test
Speed:
1350
Slide valve:
25
Start test?
Test running!
OK
6.1 Surface area calculation
Note: Only count the surface area which is scattered once the slide valve is fully
open.
In the following submenu points, you can enter the
working width and driving speed. You can read off the
surface area in the menu point Day counter.
Input the working width here.
Select the driving speed.
The display jumps to the main menu.
6.2 Seed rate calibration test
This is where you can configure the settings for the
slide valve and for speed, as well as starting the test.
The following points must be entered for the seed rate calibration test, using
the setting chart:
Enter the speed as per the setting chart.
This is where you can select the slide valve
opening.
If all values are correctly set, commence the
test.
Indicates that the seed rate calibration test
has finished. The display then returns to the
main menu.
