7
Quality
for
Professionals
5.5
5.5
5.5
5.5
Power supply
Power supply
Power supply
Power supply
The electrical cable, provided as part of the standard
delivery, should be connected to the battery directly. You
can connect it to other plug sockets (in the tractor cab),
however always ensure that these are 100% in contact.
IMPORTANT INFORMATION:
IMPORTANT INFORMATION:
IMPORTANT INFORMATION:
IMPORTANT INFORMATION:
•
Do not remove or bypass the fuse, or use a higher-
rated fuse than that specified in the operating
instructions! This can result in damage to the
control module.
•
The 12 V power supply must NOT be
connected to the socket for the cigarette lighter!
•
The cable with the fuse (20A)
(20A)
(20A)
(20A) must be
connected to the positive terminal, and the
other cable to the negative terminal.
•
If a different cable is used, it must have a cable
cross-section of 2.5 mm² and must be fused.
•
After use, the device must be disconnected
from the battery, since the control box will
otherwise continue to draw power.
5.6
5.6
5.6
5.6
E
E
E
Emptying and removing the tank
mptying and removing the tank
mptying and removing the tank
mptying and removing the tank
In order to ensure that the machine is fully emptied, turn it
upside down. It is sometimes necessary to remove the
plastic tank for the purpose of cleaning or emptying. The
tank is secured at the top of the steel frame with 2 round-
head screw (M6x25), which must be removed in this case.
TIP:
TIP:
TIP:
TIP: When reattaching the tank, seal the cone again with
silicone, in order to prevent the ingress of water.
Connector for
Negative terminal
module
Positive terminal
with in-lin fuse
Pic: 5
Pic: 6
