23
Quality
for
Professionals
•
Swivel in and lock grabber arms before road transport!
•
Lock track marker in transport position!
•
When filling the tank with slug pellets and similar poisonous compounds, only fill
as much as is required for the task at hand. Wear protective clothing, protective
gloves as well as face and eye protection when filling.
•
Observe the warning instructions of the manufacturer on the package. The seeds
used by your spreader may be poisonous!
•
Never place your hands or clothes, etc. in the vicinity of rotating parts!
•
Keep your distance when the machine is switched on!
•
Never look into the scattering cone!
•
Leftover product should be returned in their original packaging. They must not be
disposed of unchecked in the environment.
•
There are no known negative effects on the materials used from approved
pesticides.
•
Repairs, maintenance and cleaning work, as well as remedying of functional faults
must always be carried out after the drive has been switched off and the engine
has reached standstill!
10.3
10.3
10.3
10.3
A
A
A
Attached devices
ttached devices
ttached devices
ttached devices
•
Before attaching and removing devices to the three-point support, put operating
equipment into a position in which unintentional lifting or lowering is excluded!
•
In order to use the three-point attachment, the attachment categories of the tractor
and the device must be identical or must be adapted to each other!
•
There is a hazard posed by cutting and crushing zones in the area of the three-
point linkage!
•
When using the external controls for the three-point attachment, do not step
between the tractor and the device!
•
When the device is in transport position, always make sure there is sufficient side-
locking of the tractor three-point linkage!
•
When driving on the road with the device lifted, the operating lever must be locked
to prevent lowering!
10.4
10.4
10.4
10.4
Maintenance
Maintenance
Maintenance
Maintenance
•
Repairs, maintenance and cleaning work, as well as remedying of malfunctions
must always be carried out after the drive has been switched off and the engine
has reached a standstill! – remove the ignition key! – switch off the device!
•
Regularly check nuts and bolts for tight seating and retighten if necessary!
•
During maintenance work when a device is lifted, always secure using suitable
supporting elements!
•
When replacing blades in working tools, use suitable tools and gloves!
•
Dispose of oils, greases and filters correctly!
•
Always disconnect the power before working on electrical systems!
•
When carrying out electrical welding on the tractor and its attached devices,
disconnect the cable on the generator and the battery!
•
Spare parts must comply at the very least to the technical requirements stipulated
by the device manufacturer! This is guaranteed by using original spare parts!
•
Do not clean the implement with water. We recommend cleaning the implement
with compressed air.
Attention:
Attention:
Attention:
Attention: Printing errors reserved, all information is subject to change.
