5
Quality
for
Professionals
2
2
2
2
Provisions
Provisions
Provisions
Provisions
Dear customer!
Congratulations! We are pleased you have purchased our product and wish you
much enjoyment and success working with it!
Please read all instructions contained in these operating instructions before using the
device!
3
3
3
3
Guarantee
Guarantee
Guarantee
Guarantee
On acceptance, please immediately check for any damage incurred to the device
during transport. Claims made for transport-related damage at a later date cannot be
accepted.
We provide a one year factory warranty from the date of delivery (your invoice or
delivery note serves as the warranty card).
This guarantee is limited to faults in material or design/construction and does not
extend to parts that are damaged by normal or excessive wear and tear.
The guarantee is voided if:
−
the damage is caused by external forces
−
operator error is at issue
−
the stipulated requirements are not fulfilled
−
the device is modified, augmented, or fitted with third-party spares without our
consent.
−
the device is treated with water
4
4
4
4
Accident prevention
Accident prevention
Accident prevention
Accident prevention
The generally applicable accident prevention regulations of the respective country in
which the device is used must be observed.
The device may only be used by persons who have been informed of the possible
dangers.
5
5
5
5
Basic information
Basic information
Basic information
Basic information
5.1
5.1
5.1
5.1
Design and mode of operation
Design and mode of operation
Design and mode of operation
Design and mode of operation
The “WD 40 M2” universal spreader is a small seed spreader with a 40 litre capacity.
The scatter disc is driven by a 12 V electric motor regulated by the controller. The
speed of the scatter disc, and therefore the working width, can easily be regulated
with the controller from the driver's seat. The power supply for the control module is
supplied directly, via the battery; however, it can also be supplied via the standard
three-pin plug if this is fitted to the original power lead. In this case, the fuse must still
be fitted in the power lead.
