10
Quality
for
Professionals
back
forward
normal Position
6.2
6.2
6.2
6.2
Deflector (baffle
Deflector (baffle
Deflector (baffle
Deflector (baffle))))
With the supplied deflector, which is to fix
right or left behind the scatter disc on the
frame, influence the scattering cone so,
that this is ideaal adapteres for your field
of application.
Fixing point
Example of use:
Watch the scattering cone and see, that on the one hand side the device overlaps
more than on the other. Then take the deflector and fix it with the cup square bolt and
the M6 wing nut which is affixed behind the diffusing panel on the square cut recess.
6.3
6.3
6.3
6.3
Scatter disc, lateral distribution, throw blades
Scatter disc, lateral distribution, throw blades
Scatter disc, lateral distribution, throw blades
Scatter disc, lateral distribution, throw blades
The scatter disc must run in an anticlockwise
direction. The adjustable throw blades fastened to
the scatter disc allow the scatter distribution to be
adjusted to the specific weight of the scatter
material. This results in an even lateral
distribution. Under normal circumstances, the two
throw blades should be centred on each other. If
the lateral distribution is not suitable, for most
scatter widths and materials, you should adjust
the throw blades in the following ways:
If the throw blades are in the front position, the
scatter material leaves the scatter disc somewhat later and is thrown slightly more to
the right (from the perspective of someone standing in front of the machine).
If the throw blades are in the rear position, the scatter material leaves the scatter disc
somewhat earlier and is thrown slightly more to the left (from the perspective of
someone standing in front of the machine).
Note:
Note:
Note:
Note: The slider only opens when the spreading disc is running!
Pic: 9
Pic: 8
