CHAPTER 3
MAINFRAME OPERATION
Entire Contents Copyright
2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
44M04 LOAD MAINFRAME OPERATIONS MANUAL
Page 30 of 93
44M00
3.6.2
Settings STORE/RECALL Operation
The function keys on the front panel of 44M04 mainframe can be used to STORE or
RECALL up to 10 Electronic Load STATES for 41L / 41L / 42L series electronic load
modules. Each state can contain up to 15 BANKS for setup data for a total of 150 electronic
load settings. Each setting can store a variety of electronic lead status and settings.
41Lxx
42Lxx
41Dxx
42Dxx
BANK (n)
15
15
15
15
STATE (m)
10
10
10
10
Total States / Mem.
Locations
150
150
150
150
Storing a Load Setup
To store a new load setting from the front panel, proceed as follows:
1-
Adjust the desired electronic load module to desired status and settings.
2-
With the UP and DOWN keys on the mainframe, select the bank (1 to 15) in which you
want to store the set up.
3-
Press the store key on the mainframe. The store key starts flashing. (If you no longer wish
to store a setting, you can press the EXIT button or wait about 20 seconds for the unit to
automatically exit the store operation).
4-
While the STORE light is flashing, press one of the number keys (1 to10) where the set-up
is to be saved. The STORE light will go out and the numbered key pressed will stay
illuminated. This indicates the set-up has been saved to that location.
Recalling a Load Setup
To recall a load setting from the front panel, proceed as follows:
1-
First select the memory bank by using the UP and DOWN arrow buttons.
2-
Pressing one of the numbered STATE buttons will recall the previously saved load
configuration.
3-
The electronic load will immediately switch to the previously saved set-up changing the
load values, operation mode and limits accordingly.
