CHAPTER 2
INSTALLATION
Entire Contents Copyright
2014 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
44M04 LOAD MAINFRAME OPERATIONS MANUAL
Page 14 of 93
44M00
2.2
AC Line Input Voltage Check
The 44M04 mainframe can be operated from a 100/115 or 200/230Vac input as indicated on
the label on the rear panel. The input is switchable so please make sure that the switch is set
correctly for your nominal mains input before turning on the mains power. The procedure
below details how to change the switch position:
1.
With the 44M04 mainframe power OFF, disconnect the power cord.
2.
Refer the drawing on the rear panel in Fig 2-1, set the switches to the Proper voltage as
described in the following:
a.
Set Switch to 100V/115V for 115Vac line voltage
b.
Set Switch to 200V/230V for 230Vac
Note: 100Vac and 200Vac is used for Japan only (Option)
Figure 1: AC Line Selection Switvh
