APRILIA RS 125 TUONO, Manual

Page: 211 / 288

use and maintenance RS 125 Tuono
19
How to use the “LAP TIME” function
(only for races in places that are closed
to traffic).
◆ To initialize the computer for the timing
function, press the push button. The
letter“
L
” (Lap) will blink on the display.
◆
To start the stop-watch, press the “LAP”
(1)push button, positioned on the left half
of the handlebars.
◆ To display the time taken for one lap,
press the “LAP” (1) push button again.
◆ After pressing the “LAP” (1) push button,
the time obtained in the previous lap is
displayed for about 15 seconds, after
which the current time is displayed
again.
◆ To end the timing, press the push
button.
It is possible to carry out up to
10 timings.
At the last timing, the writing “ L 10 L 10 L 10 L 10 ”
will appear on the display.
How to recall the time per lap (LAP
MEMORY).
◆ To recall the time per lap, press the .
The writing “ ” will appear on the di-
splay.
◆
To run through the stored times per lap,
press the “LAP” (1) push button.
The writing “
01 ” corresponds to
lap no. 1, “ 02 ” corresponds to lap
no. 2 and so on.
How to delete the stored data.
◆ To delete the stored data, press the
push button.
The writing “ L 10 ”,“ L 09 ” or “ L
08
”, etc. will appear on the display.
◆ Now, press the push button and,
keeping it pressed, press also the "LAP"
(1) push button on the left half of the han-
dlebars.
In this way the stored data will be defini-
tively deleted.
1
1 1
RS 125 Tuono_Ing_book_my03.book Page 19 Tuesday, April 29, 2003 3:11 PM