APACHE 50 PAGE # 39
Dawson’s
APPROACH E GI EERI G
AH-64A 50 MECHA ICS
23.19
Using epoxy glue the nose gearboxes in front of the
engine nacelle.
23.20
Epoxy the finished 30mm gun assembly on the bottom
of the fuselage.
23.21
Epoxy the engine nacelle exhausts to the engine na-
celles.
23.22
Assemble the horizontal fin to the tail of the aircraft by
gluing the 3/16” brass tube to the vertical fin frames. Slide the
7/32” brass tube into the 1/4” on the trailing edge of the vertical
stabilizer.
23.23
Put the tube assemblies over the vertical fin tube then fit
the horizontal fin into place. Screw the fin supports to the hori-
zontal fin. Attach the #2 sheet metal screws to the plywood
attachment point on the underside of the fin.
23.24
Attach the pushrod for the horizontal fin to the fin con-
trol horn. Program your radio so that when you are in foreword
flight the angle of the fin will be at 0 degrees. During hover it
can then be programmed to come down to about 20 degrees
trailing edge down.
23.0 FI AL ASSEMBLY