Unpacking
Preparation
Installation
Warranty
Operation
Appendix
Overview
REV-3.0 [3-17-11]
11
ComCenter-II ‘Outdoor’
Product Manual
Operation
Typical Start-Up Sequence
The following guide describes the basic functions of the Applied Satellite Engineering ComCenter.
IMPORTANT:
Visit www.ase-corp.com for the latest updates. For further information or clarification, Please contact your service
provider. Your service Provider’s tech support number should be included with the shipment.
Searching for Network (
Standard Telephone Handset
)
Within 10 seconds after power-up, you should hear a tone pattern through the standard
telephone handset; this indicates that the system is searching for the Iridium network.
[Long]-[Short]........
[Searching for Network]
Registered with Network (
Standard Telephone Handset
)
Once the ComCenter has established a network connection to the Iridium Satellite
Network, you will then hear the following:
[Short]-[Short]-[Short]-[Short]-[Short]
[Found Home Network]
Power-On Confirmation
System Ready (
Standard Telephone Handset
)
Once system is ready to accept a dial request, you will hear dial tone or a pin code tone.
[Long] (Constant)
[Found Home Network]
[Pause]-[Short]-[Pause]........
[Waiting for PIN code]
Ready-For-Use Confirmation
IMPORTANT:
For a complete listing of the meaning behind system tone messages, see Appendix A.
