Unpacking
Preparation
Installation
Warranty
Operation
Appendix
Overview
REV-3.0 [3-17-11]
16
ComCenter-II ‘Outdoor’
Product Manual
SEQUENCE
Accessing ComCenter II Settings
(RJ-11)
OPTION
DESCRIPTION
Phone Book
Press *7 to reach the Phone Book that resides in the SIM card, then
enter the three-digit QuickDial number for the entry you wish to dial.
Hang up to exit this menu.
# # #
*
7
,
Volume
Press *20 and then press 1 through 5 to change the volume level sent
to the handset. Press 1 to adjust the volume to its lowest level, and 5
to adjust it to its highest.
* 20
1
2
3
4
5
Lowest
Highest
US 911
Press *500 to toggle USA 911 dialing off and *501 to toggle it on.
By default the ComCenter II is set to USA 911 On. We strongly
recommend leaving 911 dialing on if you are a United States customer.
Be sure to read the sections below discussing emergency 911 calls.
This setting partially overrides SmartDial recognition of country codes
and allows United States callers to simply type 911 to access the
emergency system. (If this setting is off, then calls starting with “91”
are recognized as dialing the country code for India.)
* 50
0
1
Disabled
Enabled
Send GPS Location
Sends GPS coordinates to the e-mail address in the Periodic Message
destination field
*
9
1
1
Captain’s Sim
Press *530 for standard SIM card. Press *531 for Captain’s SIM.
* 53
0
1
Disabled
Enabled
PBX Answer
Signaling
Signals PBX when call connects by battery reversal
* 54
0
1
Disabled
Enabled
Network Mode
Sets the network mode with 0 being DIRECT, 1 being DHCP Client
and 2 being DHCP Server
* 61
0
1
Direct
Client
Server
2
Operation
Restore Defaults
Restores default settings (excluding network settings)
*
1
2
3
4
5
Network Mode
Press *994 for audible beeps that indicates the IP Mode setting.
Direct = 1 beep
DHCP Client = 2 beeps
DHCP Server = 3 beeps
*
9
4
9
Turn PIN off
Unlocks SIM by turning the default Iridium PIN code off. The ComCenter
II requires the PIN be turned off to access the satellites.
*
1
1
1
1
