manualshive.com logo in svg

Applied Satellite Engineering ComCenter-II 'Outdoor', Product Manual, Page: 20 / 27

Share
Download
Applied Satellite Engineering ComCenter-II 'Outdoor' Product Manual Download Page 20

Unpacking

Preparation

Installation

Warranty

Operation

Appendix

Overview

      

REV-3.0 [3-17-11]

 

20

ComCenter-II ‘Outdoor’ 

Product Manual 

SPECIAL FEATURES 

POTS/RJ-11 PORT 

This port provides a versatile satellite link to the standard equipment you’re already familiar with. RJ-11 connected 

equipment can be located more than a mile away from the ComCenter II, solving antenna location problems and 

minimizing costly antenna runs.
Besides being a voice link, this interface has the following additional features;

·  VOICE  CONNECT  WITH  SMARTDIAL.

  SmartDial  simplifies  satellite  dialing  sequences  by  converting 

familiar land line dialing to satellite dialing. But if you prefer satellite dialing, SmartDial will automatically 

detect and disable itself.

·  PABX & WIRELESS BASE STATION.

 Typical RJ-11 applications include trunk line interface to standard 

multi-user PABX systems, base station with single or multiple wireless handsets, or a single analog phone 

powered entirely by the ComCenter II for resilience planning communications back up.

·  ACCESS TO SYSTEM SETTINGS.

 ComCenter II system configuration and settings are accessible via this 

port.

·  STATUS AND ERROR TONES. 

Since most RJ-11 connected equipment is located a great distance from the 

ComCenter II, specific audible tones let you know system status at all times.

·  INSTANT GPS POSITION REPORT. 

Pressing *911 from a 2-wire RJ-11 phone immediately sends a GPS 

position report to the e-mail address in the Periodic Messaging delivery field.

ETHERNET PORT

This port opens up tremendous network and peripheral connection possibilities. Ethernet connection to the ComCenter II 

also gives you access to unique features and applications contained in its internal webpage. Features of this port include;

·  DATA CONNECT WITH ASE WEBPAGE.

 Use your favorite web browser to access the ComCenter II’s 

embedded webpage. Data connections from the ComCenter II’s webpage take just a simple click of the 

mouse.

·  DIRECT & WIRELESS ROUTER CONNECT.

 Connect directly to a single computer, drop onto your network, 

or use a wireless router for optimum convenience. 

·  ASE SATCHAT. 

Simple yet powerful SMS text messaging application available from the embedded webpage.

·  ASE PORT FORWARDING. 

This special feature requires two ComCenter IIs in most cases to easily solve 

difficult Iridium-linked M2M applications. Details are beyond the scope of this manual. Please contact ASE 

for more information.

·  SECURITY PIN CODES.

 Another feature included in the embedded webpage is the option to set PIN codes 

to prevent unauthorized use. Voice and data access become disabled and the ComCenter II will then prompt 

the user for a valid PIN code.

·  STATUS AND  ERROR  DISPLAY.

  The  ComCenter  II’s  embedded  webpage  has  a  real  time  status  bar 

showing current state of the system and Iridium network.

·  ACCESS TO SYSTEM SETTINGS AND DIAGNOSTICS.

 ComCenter II system configuration and settings 

are accessible via the embedded webpage. This webpage also includes diagnostics and system logs useful 

for installation confirmation and general use stats.

·  AT COMMANDS.

 Third party integrators can connect directly to a TCP/IP socket (<xxx.xxx.xxx.xxx:23>) and 

execute AT Commands to directly control the  modem. Contact ASE for complete AT Command Set.

Operation

Summary of Contents for ComCenter-II 'Outdoor'




























Reviews:

No comments