Applied Biosystems QuantStudio 6 Flex User Manual Download Page 120

Page: 120 / 194

When the QuantStudio

™

6 or 7 Flex Real-Time PCR System is connected to the

network, any computer on the network that is running the QuantStudio

™

Real-Time

PCR Software can:

• Monitor the status of a run (see page 120)
• Download experiment files (see page 120)
• Enable or change the calibration reminders (see page 121)

Guidelines for remote monitoring

To ensure optimal performance of the remote monitoring feature, observe the

following guidelines:

• The QuantStudio

™

Real-Time PCR Software can monitor up to 10 instruments.

• We do not recommend that a QuantStudio

™

6 or 7 Flex Real-Time PCR System be

monitored by more than 10 computers simultaneously.

• Unless you are sure that your system and computer exist on the same subnet, we

recommend that you use the IP address of the QuantStudio

™

6 or 7 Flex Real-

Time PCR System to add it for remote monitoring.

In the QuantStudio

™

Real-Time PCR Software Home tab, click Instrument

Console.

In the Instrument Console, select the icon for your instrument, then click

Manage Instrument.

Note:

If the Manage Instrument button is inactive, add your instrument to the

My Instruments group.

In the Instrument Manager, click Monitor, then click Information.

In the Monitor Instrument screen, click Monitor Running Instrument.
The QuantStudio

™

Real-Time PCR Software displays the status, attributes,

calibration status, and plot data for the selected system. If a communications

warning appears, contact your network administrator to troubleshoot the

problem.

You can lose the software connection to the system if you:

• Change the system that is connected directly to your computer
• Use the touchscreen to change the instrument name or IP address

Note:

To reestablish the connection, restart the software.

For more information about using the QuantStudio

™

Real-Time PCR Software to

transfer experiment results from the QuantStudio

™

6 or 7 Flex Real-Time PCR System,

see “Transfer experiments, templates, and results data“ on page 85.

About remote

monitoring

Monitor the status

of a run from the

QuantStudio

™

Real

‑

Time PCR

Software

Download

experiment files

Appendix C

Networking

Monitor the QuantStudio

™

6 or 7 Flex Real-Time PCR System

120

QuantStudio

™

6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide

Summary of Contents for QuantStudio 6 Flex



































































































































































































Search results

Summary of Contents for QuantStudio 6 Flex

Reviews:

Related manuals for QuantStudio 6 Flex

Brands by name

Popular brands

Applied Biosystems QuantStudio 6 Flex, User Manual

Search results

Summary of Contents for QuantStudio 6 Flex

Reviews:

Related manuals for QuantStudio 6 Flex

Brands by name

Popular brands