97
EN
Battery Replacement
Fuse Replacement
5. Make sure that the case top rotary switch and circuit
board switch both are in the OFF position. Notice the
pointing direction of the case top rotary switch and circuit
board switch are not at same direction.
6. Replace the case top and case bottom. Make sure that
all gaskets are properly seated and the battery leads do
not become pinched between the case halves, and the
two snaps on the case top are engaged. Reinstall the
three screws.
Figure 2A
Figure 2B
Fuse 2
Fuse 1
Case Top
Case Bottom
11
