97
EN
* for 0.4 to 0.8V
Overload protection :
600Vrms max.
Continuity :
Built in-buzzer sound when resistance is
less than 30Ω
(6) Diode Check and Continuity
Range
1mV
±(1.5%rdg +
5dgt)*
1.5mA
3.3V
Resolution
Accuracy
Max.Open
Circuit Voltage
Max.Test
Current
The meter will automatically shut itself off after
approximately 10 minutes after power on.
The meter can be turned back on by pushing "Power
Reset" key switch.
The beep will sound if the test lead is connected to
the µAmA (10A) input terminal but the rotary function
selector is not in the pAmA (10A) positions.
(7) Auto Power Off
(8) Beep Guard
This instrument has been designed and tested in
accordance with IEC Publication 1010, Safety Require-
ments for Electronic Measuring Apparatus and has been
supplied in a safe condition. This instruction
manual contains some information and warnings which
have to be followed by the user to ensure safe
operation and to retain the instrumnent in safe condition.
1, Before measurement, warm up for at least 60
seconds.
2. When the rotary function selector is changed during
measurement , be sure do so only after removing
the test leads from the equipment.
OPERATION
3-1 Preparation and Caution before Measurement
7