APM SP-300 Series, User Manual

Page: 71 / 132

0.33*f1 to 2*f1, 16~100 Hz, 2.0%
；
2*f1 to 10*f1, 100~500 Hz, 5.0%
；
10*f1 to 20*f1, 500~1000 Hz, 4.0%
；
20*f1 to 30*f1, 1000~1500 Hz, 2.0%
；
30*f1 to 40*f1, 1500~2000 Hz, 2.0%
；
Default test levels, % Unom, for 50Hz mains.
1. In the ‘IEC standards’ screen press the ‘IEC 4-13’ soft key.
2. Press the ‘Sweep in Frequency’ soft key to display the test screen.
Sweep in Frequency Setting
3. Press the ‘Edit’ soft key to set the required test selections for this test.
4. Move the cursor to highlight the ‘Level =’ field and press the [Enter] key to display a drop
down list with product class selections.
5. Rotate the front panel knob to highlight ‘Class 1’ and then press the [Enter] key to confirm.
68
Unom , Nominal test voltage, fixed to 230V in standard modes.
Frequency , 50Hz or 60Hz in standard modes.
Test Levels in % of Unom for Inter-Harmonics ranges:
Menu Operation
PROFESSIONAL INNOVATIVE BRANDING SERVICE 69
6. Press the ‘Save’ soft key to store the settings in non-volatile memory.
7. Press the [ESC] key to return to the previous screen, press the ‘Trigger’ soft key to load the
settings.
8. The resonance frequency will be displayed on the screen after the test has finished.
1. In the ‘IEC standards’ screen Press the ‘IEC 4-13’ soft key.
2. Press the ‘Sweep in Frequency’ soft key.
Meister Curve Setting
3. Press the ‘Edit’ soft key.
4. Move the cursor to highlight ‘Level =’ field, then press the [Enter] key to display the drop
down list.
5. Rotate the front panel knob to highlight ‘Class 2’ then press the [Enter] key to confirm.
The test time now run until completed. Total test time is determined by the test Level settings.
The test time count down in seconds is visible in the upper part of the IEC 4-13 screen.
At the completion of the test, the ‘Stop’ soft key will revert to ‘Trigger’. To abort a test in pro-
gress, press the ‘Stop’ soft key during a test run.
Menu Operation
PROFESSIONAL INNOVATIVE BRANDING SERVICE