APM SP-300 Series, User Manual

Page: 86 / 132

3. Move the cursor to highlight ‘Master’ option and press the [Enter] key to confirm.
4. Move the cursor to highlight the ‘Master Type =’ field and press the [Enter] key to confirm.
5. Move the cursor to highlight the right option and press the [Enter] key to confirm.
84
7. Press the ‘Load’ soft key to recall and display the saved state of this unit.
8. Press the ‘Save’ soft key to store the master-slave mode setting to non-volatile memory.
6. Press the ‘Set’ soft key to save the
setting, then the slave units will be
locked.
Master-slave Mode Operation Master-slave Mode Operation
PROFESSIONAL INNOVATIVE BRANDING SERVICE
6.2.1 Parallel System
Set ‘Master Type’ of the master unit as ‘Parallel’, then press the [Main] key switch to main menu.
Parallel connection
1
2
3
Output connection
Termination resistor CAN-R, flip Dip Switch 1 of the Master unit to ON position (down)
System Bus Communication Cable
85
L N
1 2 3
ON
1
2 3
PROFESSIONAL INNOVATIVE BRANDING SERVICE