2.1 Buzzer
The buzzer of the AC source beeps when the user presses the keypad on the front panel, or
press the PRG knob. If the user does not want it to sound it can be disabled.
For example, to set ‘Buzzer’ to OFF.
1. In the ‘System Setting’ menu, press the ‘Buzzer’ soft key to change the state of the buzzer.
2. Rotate the front panel knob to highlight the ‘OFF’ option then press the [Enter] key to confirm.
2. System Settings
This item is for setting the basic operation of the system including ‘Buzzer’, ‘P/O State’ and
‘O/P Relay’.
36
Menu Operation
PROFESSIONAL INNOVATIVE BRANDING SERVICE
37
2.2 P/O State
The AC source allows the user to store the output settings as the default settings before pow-
ering the unit off.
If ‘
OFF
’ is selected the unit will NOT store any settings when powered off and initialize with
factory default at power on.
If ‘
LAST
’ is selected the unit will store the last setting in effect when powered off and recall
this same setting at power on.
If ‘
USER
’ is selected a user-defined setup can be assigned for recall when the power source
is turned on.
For example, to set ‘P/O State’ as ‘USER’, ‘Couple’ set as ‘AC+DC’, ‘Vac’ set as 100V, ‘F’ set
as 50 Hz, and ‘Vdc’ set as 20V.
1. In the ‘System Setting’ menu, press the ‘P/O State’ soft key and scroll to the User entry, then
press the [Enter] key to confirm.
2. Move the cursor to highlight ‘Couple =’ field, then press the [Enter] key to confirm.
3. Rotate the front panel knob to highlight the ‘AC+DC’ option, then press the [Enter] key to
confirm.
4. Use the [0]~[9] number keys as desired and [Enter] key to set ‘Vac’, ‘F’, and ‘Vdc’ settings.
Menu Operation
PROFESSIONAL INNOVATIVE BRANDING SERVICE
Summary of Contents for SP-300 Series
