APM SP-300 Series, User Manual

Page: 15 / 132

Programmable AC Source
Professional
SELF CHECKING
Model
Serial NO.
Control Version
Display Version
Remote Version
Loading System Parameters...
Self Testing
DRAM Check
Extern EEPROM Check
Extern RAM Check
Parallel Board Check
GPIB Check
PFC Check
Output Check
SP300VAC5000W
0134581738000004
V100R003C38
V100R003C28
V100R002C18 OK
OK
OK
OK
OK
100%
OK
OK
OK
OK
NA
OK
OK
3.10 Starting Procedure
Plug in the AC power and turn on the power switch on the front panel, the programmable AC
power source will execute a self-checking routine:
The company name APM Technologies will appear on the front panel display:
After 3 seconds, it will enter the self-testing mode;
DRAM Check , checks DRAM, if failed, shows as FAIL;
Extern EEPROM Check , checks the external EEPROM memory, if failed, shows as FAIL;
Extern RAM Check , checks the external RAM memory, if failed, shows as FAIL;
Parallel Board Check , checks whether remote I/O and parallel link board is installed and co-
nnected, if not, shows as NA.
GPIB Check , checks whether the GPIB communication board is being connected, if not, shows
as NA.
PFC Check , checks the units PFC board operation, if not operating correctly it shows as FAIL.
Output Check , checks the units output of 150V both 300V ranges, if the output voltage is not
within 100V± 8V and 200V±8V it shows as FAIL.
Note: If the PFC Check or Output Check shows a FAIL result, the power source will not operate.
If there is a FAIL result in any of the other tests, the power source is still operational. In this
case, press the [Enter] key to proceed to the MAIN screen.
12
Products Introduction
PROFESSIONAL INNOVATIVE BRANDING SERVICE
4.1 Front Panel Description
Panel Description
1 4
13
Panel Description
Front Panel of 2U Models
Front Panel of 3U Models
Front Panel of 4U Models
1 2 4 5 6 9 8 3 7
1 2 3 4 5 6 7 8 9
PROFESSIONAL INNOVATIVE BRANDING SERVICE