Setup 5-9
Security Menu
The Security menu contains the security as well as the TPM (Trusted
Platform Module) setting.
Supervisor/User Password Is
shows whether you have set the
supervisor/user password or not for the system.
Set Supervisor/User Password
sets the supervisor/user password.
When typing the password, first make sure that Num Lock is off, and then
type the password in the entry fields and press
Enter
. Confirm your
password by typing it again and pressing
Enter
. You can set the
supervisor/user password to be required for starting up the system.
NOTE:
Password can be up to seven alphanumeric characters.
Diskette Access
sets the supervisor/user control on access to disk
drive(s). The options are
Supervisor
and
User
.
Fixed Disk Boot Sector
sets if a warning message will appear when the
hard disk boot sector (partition table) has been changed. The options are
Normal
and
Write Protect
.
CAUTION:
Set this item to disabled before installing an operating system, running
Fdisk
or
Format
program. Otherwise, the intended action will fail.
