10
code HC0100.00GB ed.A-1509
HY
AQUAPUMP HYBRID
HYBRID HEATER
1.
GENERAL CAUTIONS
This manual is an integral part of the product and must always
accompany it.
Should the equipment be sold or passed on to someone else,
always make sure that this manual is supplied with the equipment
for future reference by the new owner and/or installer.
The manufacturer shall not be held civilly or criminally responsible
for injuries to people or animals or damages to things caused
by incorrect installation, calibration and maintenance or by
failure to follow the instructions contained in this manual or by
operations carried out by unqualified staff.
This product must be used only for the applications for which
it was designed or approved. Any other use must be regarded
as hazardous.
During the installation, operation and maintenance of the
equipment described in this manual, the user must always strictly
follow the instructions given in this use and instruction manual.
The equipment must be installed in compliance with current
regulations and according to the manufacturer's instructions
by
qualified staff
, technically specialised in the heating field.
First start-up, conversion between different types of gas and
maintenance operations must be carried out only by staff of
Authorised Service Centres (for Italy, authorised by Apen
Group Spa)
.
APEN GROUP has a large network of authorised Service
Centres.
For more information, visit our web site
www.apengroup.com or contact the manufacturer directly.
We remind that law no. 10/91 provides that annual maintenance
of the equipment and check of thermal efficiency with a yearly
or biennial frequency (according to the heat output of the
equipment) are mandatory.
The warranty conditions are specified on the warranty certificate
supplied with this equipment.
The manufacturer declares that the equipment has been
workmanlike manufactured in compliance with UNI, UNI-CIG,
IEC, EN technical standards and with all relevant legislation, as
well as with Directive 2009/142/EEC and Machinery Directive
2006/42/EC.
•
Ministerial Decree no. 74 of 12 April 1996;
•
Presidential Decree no.412/93;
•
Presidential Decree no. 551/99;
•
Ministerial Decree no. 37 of 22/01/2008;
•
Law no. 10/84;
•
Standard UNI-CIG 7129;
•
Standard UNI-CIG 7131;
•
Law no. 186 of 01 March 1986;
•
Law no. 10/91;
•
Law no. 192/05 of 19/08/2005,
•
Legislative Decree no. 311 of 29/12/2006.
and subsequent amendments and/or integrations.
The following has been complied with as well:
•
Standard UNI EN ISO 12100, Standard UNI EN ISO 13857
•
Standards UNI EN 378-1, 378-2, 378-3 and 378-4
•
Standard UNI EN 12735-1, Standard IEC 60204-1
•
Standards EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 62233
•
Community Directives 97/23/EC, 2006/95/EC, 2004/108/
EC, 2002/95/EC, 2002/96/EC
2.
SAFETY-RELATED WARNINGS
GRAPHIC CONVENTIONS USED IN THE MANUAL
It indicates hazardous operations for persons
and/or for proper operation of the machine
It indicates operations that must not be carried
out.
It indicates important information that the
operator must necessarily follow for the
proper operation of the machine in safeguard
conditions.
Before starting any type of operation on AQUAPUMP units, each
operator must perfectly know the operation of the machine and
of its controls and must have read and understood all information
contained in this manual.
It is strictly forbidden to remove and/or tamper
with any safety device.
The use of the equipment is forbidden to
children and unassisted disabled people.
It is forbidden to touch the equipment with
bare feet and with wet or dump body parts.
It is forbidden to pull, disconnect, twist electric
cables that come out of the equipment, even if
it is disconnected from mains.
It is forbidden to stand on top of the equipment,
seat on it and/or place any type of object on it.
It is forbidden to spray or aim jets of water
directly on the equipment.
The packaging material (cardboard, clips,
plastic bags, etc.) must not be dispersed,
abandoned or left within the reach of children
as it can be a potential source of hazard.
Any ordinary or extraordinary maintenance
operation must be carried out with machine
stopped, without power supply.
Do not put your hands or insert screwdrivers,
key or other tools in the moving parts.
The person responsible for the machine
and the maintenance operator must receive
suitable education and training to perform
their tasks in safety conditions.
The operators must know personal protective
equipment and accident prevention rules
provided for by national and international
laws and regulations.
Summary of Contents for Aermax Series
