25
code HC0100.00GB ed.A-1509
HY
AQUAPUMP HYBRID
HYBRID HEATER
C
Compressor
CLS
Compressor liquid separator
OS
Oil separator
ST
Compressor inlet temperature
DT
Compressor outlet temperature
HP
High pressure transducer
Pr
High pressure switch
LP
Low pressure transducer
LS
Liquid separator
4WV
Cycle inversion valve
LR
Liquid receiver
EEV
Electronic expansion valve
NRV
Non-return valve
FL
Filter
M
Axial fan
SE
External temperature
CP
Capillary
SRA
Plate rapid exchanger
3.3. Cooling circuit characteristics
WARNING: The unit must be installed so as to allow maintenance and repair operations. The warranty
does not cover the costs for platforms or handling equipment required for any operations.
All maintenance and check operations must be carried out by QUALIFIED PERSONNEL only.
Before starting any operation on the unit, make sure that power supply is disconnected.
WARNING: The unit contains several moving parts. Be very careful while operating near them, even if
power supply is disconnected.
The heads and the delivery pipe of the compressor are usually at quite high temperature.
Pay special care while working near the batteries.
Aluminium tabs are very sharp and can cause serious injury.
After maintenance operations, close the panels by securing them with fixing screws.
Summary of Contents for Aermax Series
