47
11.1 CONTROL PANEL
All information regarding the operating status of the machine is displayed on the control panel.
The control panel allows the user to:
- select the air flow
- turn off any alarms indicating apparatus malfunctions
- constantly control all the functions relating to operation (air flow, filtration efficiency, alarm situation).
The devices which permit manual operation and visual control of the operating conditions are given here
below.
11.1.1 DISPLAY
When the machine works normally, the single-figure display shows the operating air flow (0-1-2-3).
If, on the other hand, the letter F appears, this means that operation of the electrostatic cell is not correct.
The reason may be a deposit of pollutant on the surface of the ionisation wires (see paragraph
"ELECTRONIC CIRCUIT ALARM SIGNALS").
If the letter F appears together with the indication ALARM, the operation of the machine does not
stop, however it is an indication of efficiency reduction.
11.1.2 (RECEIVER)
The receiver permits the reception of the signal coming from the
infrared remote control unit to obtain speed changes or switching off
of the apparatus; if one of the four remote control buttons has been
pressed, the Led flashes for about 1 second.
Feb
. 12
Automatikprodukter
