13
4.1 ASSEMBLY OF VERSION UC12
a) Open the packings and extract the components
b) Remove the grill by pushing the black hatches towards the center
c) Extract prefilter and electrostatic cell
d) Position the outlet unit next to the filter unit (can be fixed to one side or the other)
e) Using the included self threading screws Ø3,8x9 secure the air outlet unit to the filter unit
f) Position the closure panel on the opposite side and secure using the same type of screws
g) To facilitate the fixing to the ceiling we recommend leave filter and grill out
4.2 ASSEMBLY OF VERSION UC13
a) Open the packings and extract the components
b) Remove the grill by pushing the black hatches towards the center
c) Extract prefilter and electrostatic cell
d) Position the re oxygenising unit next to the filter unit (to facilitate the installation we recommend to leave
all electrical connections on the same side)
e) Using the included self threading screws Ø3,8x9 secure to the filter unit
f) Position the closure panel on the opposite side and secure using the same type of screws
g) To facilitate the fixing to the ceiling we recommend leave filter and grill out
Electrical
connections
Lower side
Internal fixing
Lower side
Internal fixing
ATTENTION: the
outllet unit may be
secured externally
from three sides,
whereas the lower
side must be
secured from inside
the machine as
seen on the
drawing. The closing
panel however may
be secured to the
filter unit with four
external screws
ATTENTION: the re
oxygenising unit
may be secured
externally from three
sides, whereas the
lower side must be
secured from inside
the machine as
seen on the
drawing. The closing
panel however may
be secured to the
filter unit with four
external screws
Feb
. 12
Automatikprodukter
