15
4.5 ASSEMBLY OF VERSION UC12s
a) Open the packings and extract the components
b) Remove the grill by pushing the black hatches towards the center
c) Extract prefilter and electrostatic cell
d) Position the Ø250 cone to the side of the filter unit (can be secured on both right and left side)
e) Using the included self threading screws Ø3,8x9 secure the cone Ø250 to the filter unit
f) Position the closure panel on the opposite side and using the same screws secure it to the filter unit.
g) Position the Ø250 panel on the outlet unit and secure using the included screws Ø3,8x9
h) To facilitate the fixing to the ceiling we recommend leave filter and grill out
4.6 ASSEMBLY OF VERSION UC13s
a) Open the packings and extract the components
b) Remove the grill by pushing the black hatches towards the center
c) Extract prefilter and electrostatic cell
h) Position the Ø250 cone to the side of the filter unit (to facilitate the installation, we recommend to have
all electrical connections on the same side)
d) Using the included self threading screws Ø3,8x9 secure the cone Ø250 to the filter unit
e) Position the closure panel on the opposite side and using the same screws secure it to the filter unit
f) Position the Ø250 panel on the re oxygenising and secure using the included screws Ø3,8x9
g) To facilitate the fixing to the ceiling we recommend leave filter and grill out
Electrical connections
Feb
. 12
Automatikprodukter
