29
5.9.1 Ionizing
wires
The wires must be always integral and taut. In case of eventual breakage of one of them proceed
immediately with its changing.
5.9.2 Capitation
blades
The blades must be at sight straight, without undulations. The blades must be also clean, without any
strange particles among them.
5.9.3 Insulators
The insulators are made of a ceramic material which function is to insulate electrically.
They should be clean, dry, integral
5.9.4 Printed
circuit
The electric connection between the electronic circuit and the electrostatic cell takes place in the printed
circuit. Check that the arcs of flexible material are integral and the base has not scorches or cracks.
6
S A F E T Y F E A T U R E S
The machine is equipped with both electrical and mechanical safety devices that must never be altered or
removed.
6.1 MECHANICAL SAFETY FEATUIRES
The grill has been particularly designed to avoid accidental contact with parts with tension, and may only be
removed in case of maintenance or repair. In this case always remove power before removing the grill.
DO NEVER INSTALL OR START THE MACHINE WITHOUT THE GRILL
6.2 ELECTRICAL SAFETY FEATURES
For maintenance the inlet grill must be removed. A micro switch will at this moment cut the power, -in case
this has not already been done.
ALWAYS REMOVE POWER BEFORE MAINTENANCE
The pin that operates the micro switch is essential to safety and must not be blocked in closed position to
compromise safety. If the micro switch gets damaged, the machine will turn itself off. In this case contact the
technical assistance for replacement.
6.2.1 Safety features of electrical circuit
The electronic circuit is designed to turn itself off in case a malfunctioning which may compromise the
integrity is detected. The circuit also contains a thermal fuse (on AFC System and Nature System only)
which will cut power in case a short circuit should occur downstream from the transformer.
A fuse protecting the electrical mains is in place to safeguard against transformer short circuiting.
Feb
. 12
Automatikprodukter
