Model
50L31
Document No.
ITCD0101
Version
v5.0
Panel
V500HJ1-LE1
Effective from
2013-9-10
Date Updated
2013-9-10
NO
Amount
Diagram
Tool Parameters
1
2
Figure 2
2
Figure 3
3
Figure 4
4
6149-650045-02101101
1
Figure 4
5
Figure 1
6
Prepared by
Reviewed by
Approved by
Zhang Wei
Project Controlled Seal
Station Name
Speaker Processing
Part Number
Figure:
Recent
Modification
Record
Section/Serial No.
Descriptions
Preprocessing 01
Insert binding post of red/black wire to binding post of speaker, then pull
it gently to ensure not coming off.
Operations and Requirements
Put 1PCS speaker on table and check if blade terminals are fine with one
wide and one narrow and with no oxidation.
Insert black binding post to narrow blade terminal.
When finished, step on the switch with foot and send the product to next
station.
1. Wastes produced by this station shall be placed in the assigned position. Refer to
Waste Classification and Disposal List
.
2. Insert the binding post to the blade terminal correctly and in place.
Notice
650mm 2Pin yellow/black speaker wire with one end
PH-2.0 terminal, another end straight pin self-hold
terminal
Take 1PCS red/black wire, and insert red binding post to wide blade
terminal.
Insert yellow/black speaker wire to another speaker with the same
method.
7711-22858A-50000011
8
Ω
10W speaker with sponge
6149-850045-02101201
850mm 2Pin red/black speaker wire with one end PH-
2.0 terminal, another end straight pin self-hold terminal
1
Please read and understand the
operating instructions carefully
Figure 1
1
The terminal is not
inserted in place.
NG
未将端子插
到位
Fit the binding post in
place and pull it
gently to ensure not
coming off.
Blade terminals of speaker with
one wide and one narrow
After inserting wire terminal,
fit this buckle to the binding
post of speaker.
Figure 1
Figure 2
Figure 3
Figure 4
Summary of Contents for LE50H264
Page 27: ...Operation Instructions ...
