Model
50L31
Document No.
ITCT0204
Version
v5.0
Panel
V500HJ1-LE1 Rev.Cx
Effective from
2013-9-10
Date Updated
2013-9-10
NO
Amount
Diagram
Tool Parameters
1
7116-420L32-42F20011
2
42L32 panel-pressing plate(L2)
Figure 1
2
7116-420L32-42F20001
3
42L32 panel-pressing plate(L1)
Figure 1
3
7116-420L32-42F20021
1
42L32 panel-pressing plate(R1)
Figure 1
4
5
Prepared by
Reviewed by Approved by
Zhang Wei
Fit 2PCS panel-pressing plates(L2) to surface frame as illustrated, and
make sure it is fit in place.
Fit 3PCS panel-pressing plate(L1) to surface frame as illustrated, and
make sure it is fit in place.
Fit 1PCS panel-pressing plate(R1) to surface frame as illustrated, and
make sure it is fit in place.
Section/Serial No. Unit Assembly 04
Part Number
Descriptions
Operations and Requirements
Station Name
Panel-pressing Plate Installation-B
1. Wastes produced by this station shall be placed in the assigned position. Refer to
Waste Classification and Disposal List
.
2. Panel-pressing plate should be inserted in place, do not misplacing.
When finished, step on the switch with foot and send the product to
next station.
Figure:
Notice
Project Controlled Seal
Recent
Modification
Record
Please read and understand the
operating instructions carefully
4
OK
NG
panel-pressing
plate(L2)
panel-pressing
plate(L2)
panel-pressing
plate(L1)
panel-pressing
plate(R1)
In place
Not in place
Figure 1
panel-pressing
plate(L1)
panel-pressing
plate(L1)
Summary of Contents for LE50H264
Page 27: ...Operation Instructions ...
