Model
50L31
Document No.
ITCD0103
Version
v5.0
Panel
V500HJ1-LE1
Effective from
2013-9-10
Date Updated
2013-9-10
NO
Amount
Diagram
Tool Parameters
1
7030-420L31-4U711101
1
42S31glossy black button array(seven buttons)
Fit the button array to the slot of back cover properly.
Figure 1
Tape dispenser
2
9014-112L31-00001031
1
37L31/42S31 key board assembly
Fit the key board assembly to button array bracket on back cover.
Figure 1
Electric screwdriver
3
7B11-0306A4-00101111
2
Fasten key board to back cover with 2PCS screws.
Figure 1
3
±
0.5kgfcm
4
7912-712500-020R1311
4
Viscose tape(long 50mm)
Fix the speaker wire to back cover with 4PCS 80mm viscose tape.
Figure 1
5
Prepared by
Reviewed by
Approved by
Zhang Wei
Part Number
Descriptions
Operations and Requirements
Station Name
Back Cover Processing-B
Project Controlled Seal
Recent
Modification
Record
1. Wastes produced by this station shall be placed in the assigned position. Refer to
Waste Classification and Disposal List
.
2.Stick viscose tape as requirement, stick it as
“Ω
" tightly, without curling up.
3 Self-chek to avoid defective product entering next procedure.
When finished, step on the switch with foot and send the product to next
station.
Section/Serial No. Preprocessing 03
Figure:
Notice
Φ
3
×
6mm flat-head flat-tail nickel-plated tapping
screw
3
Notice:
After installing buttons, check if
the buttons are installed in place
without any abnormalities.
Black glossy
button array
Key board
assembly
Figure 1
Process Requirements:
1. Check for rusted screws, missing slots
or bad cross slot.
2. Check if the electric screwdriver
torque force is within the specified
requirements.
3.When installing screws, align the
electric screwdriver and the screw to the
screw hole vertically (do not tilt).
4. In the process of installing screws,
properly exert pressure to make a close
contact between electric screwdriver
and screw slot to avoid slipped screw.
5. Put the defective screws in the
defective product box and do not throw
them at will.
Please read and understand the
operating instructions carefully
Take only
one screw
at a time
Summary of Contents for LE50H264
Page 27: ...Operation Instructions ...
