Model
50L31
Document No.
ITCT0210
Version
v5.0
Panel
V500HJ1-LE1 Rev.Cx
Effective from
2013-9-10
Date Updated
2013-9-10
NO
Amount
Diagram
Tool Parameters
1
9012-111A18-15004011
1
26-42" 150W LED ultra-thin power board
Figure 1
Electric screwdriver
2
7912-211025-0109R511
2
10*25*9.5mm 60
±
5
°
black fire-proof silica gel pad
Figure 1
5
±
1kgfcm
3
7B11-030696-00101111
4
Φ
3
×
6mm B-head nickel plated machine screw
Figure 2
4
Figure 2
5
Prepared by
Reviewed by Approved by
Zhang Wei
Check if power board looks fine without any abnormalities.
Stick 2PCS EVA pad to the side of switch of the back of power board.
Place power board to panel back properly(direction)
Section/Serial No. Unit Assembly 10
Part Number
Descriptions
Operations and Requirements
Station Name
Power Board Locking
1. Wastes produced by this station shall be placed in the assigned position. Refer to
Waste Classification and Disposal List
.
2. Install screws by the serial number (install one by one) and abnormalities such as screws being neglected, tilted and slipped are not allowed.
Project Controlled Seal
Recent
Modification
Record
Figure:
Notice
Fasten power board to panel with 4PCS screws.
When finished, step on the switch with foot and send the product to
next station.
Please read and understand the
operating instructions carefully
Take only
one screw
at a time
10
Process Requirements:
1. Check for rusted screws, missing
slots or bad cross slot.
2. Check if the electric screwdriver
torque force is within the specified
requirements.
3.When installing screws, align the
electric screwdriver and the screw to
the screw hole vertically (do not tilt).
4. In the process of installing screws,
properly exert pressure to make a close
contact between electric screwdriver
and screw slot to avoid slipped screw.
5. Put the defective screws in the
defective product box and do not
throw them at will.
Specific subject in
accordance with work order
防火硅胶胶垫片
1
4
3
2
Fire-proof silica
gel pad
Figure 1
Figure 2
Summary of Contents for LE50H264
Page 27: ...Operation Instructions ...
