Model
50L31
Document No.
ITCT0202
Version
v5.0
Panel
V500HJ1-LE1 Rev.Cx
Effective from
2013-9-10
Date Updated
2013-9-10
NO
Amount
Diagram
Tool Parameters
1
7422-500CM2-38000011-F
1
50
″
TFT V500HJ1-LE1 Rev.C1 LED panel
Figure 1
2
Figure 1
3
Figure 2
4
5
Prepared by
Reviewed by Approved by
Zhang Wei
Figure:
Remove its protective package and check if it looks fine.
Section/Serial No. Unit Assembly 02
Part Number
Descriptions
Station Name
Display Screen Placement
Notice
3.Make preparation for static electricity by wearing anti-static glove.(select display screen and lower bracket according to work order)
Operations and Requirements
1. Wastes produced by this station shall be placed in the assigned position. Refer to
Waste Classification and Disposal List
.
2.Take it slowly and carefully, do not scratch, hold its metallic frame and do not touch or scratch display area by anything.
Hold its metallic frame and do not touch its display area by anything.
Put it into surface frame with display side facing downward with the
buckle of surface frame locking display screen.
When finished, step on the switch with foot and send the product to
next station.
Project Controlled Seal
Recent
Modification
Record
2
Specific subject in
accordance with work order
Process Requirements in Screen Operations:
1. When taking the screen, hold its metallic frame and do not
touch the display screen by any part of your body.
2. Check if the screen is scratched /dirty/cracked.
3. You are required to wear anti-static clothes and gloves
during operating, to avoid damaging the screen by static.
Remove
protective film
from screen
Ensure no
abnormalities such as
scratches/smudginess/
crack.
Figure 1
Figure 2
Please read and understand the
operating instructions carefully
Need two
people to
cooperate
Summary of Contents for LE50H264
Page 27: ...Operation Instructions ...
