Step 2
Remove
Wall Jamb [02]
and drill a 1/4"
hole at each location marked for
Wall
Jamb [02] (
Fig 3).
Wear safety glasses and cut-resistant,
non-slip gloves when drilling or cutting
to avoid risk of injury.
ATTENTION
8
Fig 3
Step 3
1.Insert
Anchor
[22]
in each hole location.
2.The
Anchor
[22]
should
fi
t securely into the
holes. If needed a rubber mallet can be used to
insert Wall Plugs.
3.To reduce risk of property damage, the use of
metal hammers is not recommended. If needed,
use drill to slightly enlarge the opening of the hole
(Fig. 4).
IMPORTANT:
Anchor
[22]
MUST be used.
[
22
]
Fig 4
