Step 15
1.Measure the distance between the
Bottom
Guide [15]
and the door side wall ("W1").The
length of
Threshold Gasket [05]
would be
"
W1,
minus
1-3/16 (30mm
)"
(Fig 16.1).
IMPORTANT: if the Bottom Rail [04] and the
Threshold
Gasket [05] match the width.
There's no need to cut them.
If they don’t,
please see Step 2 for cutting instructions.
2.Using a pencil or another marking tool (such as
masking tape), mark distance
"W1"
on the
Bottom Rail [04]
,
"W1 minus 1-3/16" (30mm)"
on the
Threshold Gasket [05].
IMPORTANT: Double check the measurements
before cutting.
Cut the
Bottom Rail [04]
with a
fine toothed (32 TPI) hack saw. If needed, use a
metal file to smooth rough edges. Clean up metal
shavings. Cut the
Threshold Gasket [05]
with a
tin snip. DO NOT stand on or use a
vice to hold the
Bottom Rail [04]
while cutting.
Fig 16
18
[
04
]
x1
[
05
]
x1
W1
W1
W1
, su
btra
ct
1- 3/
16"
1-
3/ 1
6"
1
2
W1
