Step 11
1.Disassemble the
gasket
and
anchor
from the
Wall Bracket [18]
. Attach the
gasket
and
anchor
to wall using
Screw ST5x35 [19]
. Use drill to start screws into
anchor
. Next, use a
screwdriver to hand tighten until secure (Fig 12.1).
2.Slide bracket sleeve onto end of
Support Bar [03]
(Fig 12.2).
3.Slide bracket sleeve onto the anchor. Tighten two
screws
of the
Wall Bracket [18]
by following
sequence
"b"
,
"a"
(Fig 12.3).
4.Attach the
Support Bar [03]
to the inside of the
Fixed Panel [10]
with the
Fasteners
[13]
as
shown in Fig 12.2. Ensure the
Support Bar [03]
is level. Use provided Allen wrench to hand
tighten (Fig 12.3, Fig 12.5).
5.Tighten two
screws
of the
Wall Bracket [18]
by following sequence
"d"
,
"c"
(Fig 12.6).
Fig 12
[4]
5
4
1
FH Screw
ST5X35
anchor
gasket
14
6
2
3
a
b
c
d
