Step 4
Place the
Wall Jamb [02]
onto the wall.
Use drill to start the
ST4x35 screw [20]
into the
Anchor
[22]
. Use a screwdriver
to hand tighten until secure. (Fig. 5)
9
Fig 5
[
20
]
1
Step 5
1.Carefully lay your glass panels
fl
at on a
soft, padded surface to inspect the glass.
2.Apply a good quality Silicone Sealant on
the bottom of the
Fixed Panel [10]
(Fig 6.1).
3.Place a thick bead of silicone along the
full length of
the
inside of
the
back inner corner
of
Fixed Panel [10] Wall Jamb [02] (
Fig 6.2).
4.Remove inside corner protector from top
of
Fixed Panel [10]
. Carefully, and with
assistance from another capable person,
position the
Fixed Panel [10]
into the
Wall
Jamb [02] (
Fig 6.3).
Fig 6
2
[
02
]
[10]
3
