Step 10
1.Using a pencil or other marking tool (such as masking tape), mark the position of the
Wall
Bracket [18]
(Fig 11.1).
2.Remove the
Support Bar [03]
and
remove
the
Wall Bracket [18]
from the
Support
Bar [03].
3.Mark the screw hole locations (Fig 11.2).
4.Drill a 1/4" hole to accept the
Anchor
[22]
(Fig 11.3).
IMPORTANT:
To avoid risk of injury or product damage, make sure that you drill into studs.
5.Insert
Anchor
[22]
in hole location. If needed, a rubber mallet can be used to insert
anchor
.
To reduce risk of property damage, metal hammers
should not be
used. If needed, use drill
to slightly enlarge the opening of the hole (Fig 11.4).
IMPORTANT: Anchor [22]
MUST be used.
Fig 11
13
2
3
1/4"
4
1
[
22
]
