Care & Maintenance
BASES and BACK WALLS: To ensure long-lasting life for your acrylic bases and back walls
(if installed), wipe them o
ff
after each use with a soft cloth. To clean the acrylic surface, use
non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners.
Never use abrasive cleansers, metal brushes, or scrapers, as they can scratch or dull the
surface.
GLASS: To ensure long-lasting life for your glass shower products, after each use rinse
and wipe o
ff
the glass using either a soft cloth or a squeegee to prevent soap buildup
and water spots (hard water can etch the surface of the glass over time if left to dry).
To avoid damaging the surface, never use abrasive cleaners or cleaning products that
contain scouring agents. Likewise, never use bristle brushes or abrasive sponges that can
scratch the surface.
HARDWARE: To ensure a long-lasting
fi
nish, wipe o
ff
the metal parts after using with a
soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach,
or acid. If accidentally used, rinse the surface as soon as possible to prevent damage to the
fi
nish (peeling or corrosion). After cleaning the polished
fi
nishes, rinse thoroughly and wipe
dry with a soft cloth. Clean stainless steel surfaces at least once a week. When applying
stainless steel cleaner or polish to stainless steel hardware, work with (not across) the
grain. Never use an abrasive sponge or cloth, steel wool, or wire brush, which may
permanently scratch the surfaces.
NOTE: Regularly inspect the glass and all hardware for misalignment, proper
attachment, and damage. Contact ANZZI with any questions or concerns.
