Anywave MPTV, User Manual

Page: 7 / 96

MPTV V1 TX User Manual
MPTV-V1-1KW-USR-DOC-V1.0, 05/25/2018 Page 7 of 96
1. Introduction
This User Manual contains operational instructions for the Anywave MPTV VHF
Band 1 1kw TV Transmitter fitted with 2 PA drawers, delivering ATSC output powers
of 1 kW (after the BPF). Please note that trained and qualified personnel are required
to operate, install, maintain, and service this transmission equipment.
1.1 TX Overview
The Anywave MPTV VHF Band 1 1kwTransmitter comes in single and dual exciter
configurations. Photos of a single exciter system are shown below. The main
subsystems (as seen from the front) include Exciter(s), Controller (with a touchscreen
LCD, and built-in preamp), two 600W power amplifiers (4-power transistors per PA),
an AC Mains Breaker, and a channel mask Band Pass Filter (BPF) – optional – installed
on the top of the cabinet rack.