Anywave MPTV, User Manual

Page: 59 / 96

MPTV V1 TX User Manual
MPTV-V1-1KW-USR-DOC-V1.0, 05/25/2018 Page 59 of 96
Network Screen : The User can check and set all the Contoller network information
in this screen.

Re-Defualt: Reset Default settings - This button is used to set all the
network settings to the default values, as show below:
IP:
192.168.1.210
MASK: 255.255.255.0
GateWay: 192.168.1.1

Set: There is a Set button for each bar in this screen. Pressing the Set
button will lead to the corresponding configuration screen of IP or Mask
or GateWay accordingly. Using the IP setting as example, Press any part
of the white bar on the IP Setting Screen and the keyboard (shown below)
will be enabled, turing from grey to yellow. The user can only set 3-digits
of one bar at a time. When the configuration is finished, press OK to
confirm. If the keyboard is enabled by mistake, press Cancel to exit the
setting mode. Don’t press Ok without entering a valid number, otherwise
the system will fill it with all zeros instead
.