Anywave MPTV, User Manual

Page: 23 / 96

MPTV V1 TX User Manual
MPTV-V1-1KW-USR-DOC-V1.0, 05/25/2018 Page 23 of 96
2.2 Digital Exciter
Front Panel
LCD:
40×2 LCD with power saving backlight
6 Buttons :
Left, Right, Up, Down, OK, ESC
6 LEDs:
When in Exciter mode:
LED_TS1: Green light on indicates TS1 is selected and the input TS signal is OK
LED_TS2: Green light on indicates TS2 is selected and the input TS signal is OK
LED_TSErr: Red light on indicates the selected input signal has error
When in Translator mode:
LED_ TS1: Green light on indicates the synchronization of input RF signal is OK
LED_TS2: Green light on indicates the equalization of input RF signal is OK
LED_TSErr: Red light on indicates there is synchronization error or equalization
error
In both Exciter and Translator mode:
LED_ GPS: Green light on indicates GPS connected and locked
LED_ RFON:
Green light on indicates system ready and RF on
LED_ SysErr: A flashing red LED indicates the presence of a system error
A solid red LED indicates the unit is in "Local (LCL)" control mode,
and when this LED is off, this indicates that the unit is in "Remote
(RMT)" control mode
1 BNC connector:
RFMON: Reserved