Anywave MPTV, User Manual

Page: 28 / 96

MPTV V1 TX User Manual
MPTV-V1-1KW-USR-DOC-V1.0, 05/25/2018 Page 28 of 96
3. Installation/Initial Turn-On
Once the RF connections have been properly made into your antenna feed or
suitable station load, and the Transmitter has been properly wired to the station
electrical panel (as outlined in Chapter 1) you are now ready to turn on the system.
Please locate and have handy for reference a copy of your MPTV TX Factory Test
Report, and Exciter User Manuals.
Please follow the steps outlined below to safely turn on and bring your TX system
up to power.
1. Apply power to the Transmitter by turning ON the AC Main Breaker located in the
lower left front of the TX and ensure that the AC Mains indication is illuminated.
You will hear the PA fans rev up to full speed for a few seconds and then ramp down.
AC Mains LED ON
Turn Main Breaker ON
(Up position)